Offline Automatic Glue Dispensing and Pressure-Holding Machine

Product Details
Customization: Available
After-sales Service: Global After-Sale Serve Engineer Team
Precision: High Precision
Manufacturer/Factory & Trading Company
Gold Member Since 2017

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Year of Establishment
2000-08-31
Management System Certification
ISO 9001
  • Offline Automatic Glue Dispensing and Pressure-Holding Machine
  • Offline Automatic Glue Dispensing and Pressure-Holding Machine
  • Offline Automatic Glue Dispensing and Pressure-Holding Machine
  • Offline Automatic Glue Dispensing and Pressure-Holding Machine
  • Offline Automatic Glue Dispensing and Pressure-Holding Machine
  • Offline Automatic Glue Dispensing and Pressure-Holding Machine
Find Similar Products
  • Overview
  • Product Description
  • FAQ
Overview

Basic Info.

Model NO.
Topbest-DP-331
Condition
New
Certification
ISO, CE
Warranty
24 Months
Automatic Grade
Automatic
Installation
Vertical
Driven Type
Electric
Programming
Teaching Pendant Programming
Driving Mode
Stepping Motor+Synchronous Belt
Reapeated Accuracy
+/-0.02mm
Input Volatge
220V AC / 50Hz (110V AC / 60Hz)
Transport Package
Wooden Box Case
Specification
1850MM*2080MM*2160MM(Customizable)
Trademark
Topbest
Origin
China
HS Code
8479899990
Production Capacity
300 Sets/Month

Product Description

Product Description
Structure:
1 The lower rack of the equipment is welded with 50 * 50 * 2 square tubes and painted with sky blue paint.
2 The upper rack is assembled with 40 * 40 International standard profiles and transparent acrylic
3 The equipment includes: 2 sets of fixtures, dispensing device, pressure holding device, sp-pur5 heated hot melt adhesive pump, etc
UPH: 327PCS/H (estimated Titan4 WHP product cycle time)
4 Suitable Maximum product size L * W * H: 500mm * 500mm * 65mm
5 Compressed air: 5-7kgf/cm2 (requires filtered water, oil, etc.).
6 Electrical performance: grounding below 8 Ω, insulation resistance above 200M Ω;
7 The control system is independent, and equipped with an emergency stop switch;
8 Combining pneumatic and electric, the pneumatic control system consists of a gas source, filter, pressure-reducing valve, solenoid valve, busbar, etc. The electronic control system consists of PLC or industrial computer, power supply, terminal, MCB, relay, operation panel, alarm light, etc;
9 Frame structure and other structural components: composed of square tubes, sheet metal, foot, bottom plates and other processed parts, all metal processed parts are surface treated with rust-prevention; Equipment equipped with safety doors and Security access control;
Advantage:
1 Dispensing for large-size product
2 Pressure-holding, more stable and sturdy, and peel-off and fall-off proof
3 Dispensing area and holding pressure adjusted easily
4 Accureate moving with Stepping motor+Synchronous belt 
5 Easy operation and programming with Teach pendant
Feature:
1 Equipping SMC cylinder, with effective stroke 300MM and cylinder thrust 6132N
2 Coordinating installation with Linear bearings and oil-free bushings, ensuring vertical and sliding smoothly
3 Using pressure blocks to press the upper mold, the upper mold can be replaced according to the products
4 Stick 7MM red foam on the contact surface between the bottom of the upper mold and the product
5 Adopting the gantry structure which supported by dual Y structures
6 Adopting a large volume hot-melt pump equipped with heating SP-PUR5 for glue-feeding
7 The distance from the edge of the equipment to the hot-melt valve is 230mm, make sure enough space for high-speed and efficienct working and safety, improving the yield rate
8 Adding transparent acrylic on the dispensing Z-axis near the front door to avoid injury to operators during manual operation

Offline Automatic Glue Dispensing and Pressure-Holding MachineOffline Automatic Glue Dispensing and Pressure-Holding Machine
Offline Automatic Glue Dispensing and Pressure-Holding Machine
FAQ

1.Q: Are you manufacturer or trading company?

 

We are manufacturer, we build the machine by our team. We have R&D team that can customize the machine based on customer requirement.

2.Q: Can you provide the quotation for your glue dispensing machine?

Thanks for your inquiry, before we can provide quotation, please share your glue data sheet especially viscosity of the glue use, glue dispensing volume ,glue packing and your product details so that we can give suitable solution. Highly appreciate if you can share the manual glue dispensing video. 

3.Q: Does our dispensing unit can be integrated with your platform?

It is workable, previously we have integrated dispensing valve with Vermes, Musashi and Nordson. Otherwise, please confirm signal type needed to be provided by us.

4.Q: How to control the amount of glue?

The amount of glue is controlled depends on valve used. Air pressure controller valve is less accurate. We can also control valve opening by using voltage or current signal to control the glue amount. Also we can change real time dispensing speed by changing PWM signal to control the excessive glue at corner side.

5.Q: What are the consumable parts of your machine?

Example for syringe system, we will provide 30 dispensing needle and 5 glue syringe for each machine. Others system will be negotiable with customer.

6.Q: How much is the transportation freight?

The freight depends on the quantity, weight, size and the destination port.

7.Q: How about the working life time of machine?

Normally, our machine can be used for over 5 years. Except for consumable parts, the other parts can be replaced for free of charge within one year.

8.Q: How can I trust your company and ensure to get the goods when i placed order from you?

We established since 2000 with 4000 square meter factory, supported by 100 employee. We also have 500 customer all around the globe.

9.Q: How about the package? Is it safe during the delivery?

All machine is packed by standard strong plywood with foam inside.

10.Q: What's your lead time?

15-20 working days depending to your quantity.

11.Q: Are the machine easy to use? If I have no experience, can i operate it well?

Did you provide the user manual and operating videos to support us?

Yes, our machine is designed easy to use. Normally, it will take you 2-3 hours to learn on how to operate, if you have experience on the similar machine, it will much faster to learn. We will provide the English user manual, and remote video support. If you still have problems, we will arrange on site support.

12.Q: If we come to your factory, will you provide the free training?

Yes, warmly welcome you to visit our factory, we will arrange the free training for you.

13.Q: How to avoid glue dripping or glue tail?

We retract back the glue after dispensed. We also reverse the path first before retract the glue dispensing needle.     

 

 

 

 

 

 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier